Table of Contents
Advertisement
Configuring your Monitor
Automatic Setup
The Setup Utility included
on the setup diskette is for
displaying dot patterns. They do
not replace or modify the display
driver.
The Automatic Setup
instructions require the
monitor to be warmed up for 15
minutes. This is not required for
normal operation.
Setup Diskette for Windows 95 or Windows 98
This section must be
completed before
continuing with the
Windows 95 or Windows 98
Auto Setup for the PC on
page 7.
On LCD monitors, unlike
CRTs, a faster refresh rate
does not improve display
quality. IBM recommends using
either 1280 x 1024 at a refresh
rate of 60Hz or 640 x 480 at a
refresh rate of 60Hz.
6
When you first use your monitor you must perform Automatic Setup (
). This procedure sets up your monitor to process the video signals from
S
ETUP
your computer without image discoloration or smearing. After you perform
, the settings are stored and used each time you turn on the
A
S
UTO
ETUP
monitor.
To use the Plug and Play feature in Windows 95 or Windows 98, files should
be loaded from the IBM Color LCD Monitor Installation diskette as follows:
1.
Turn off the computer and all attached devices.
2.
Ensure that the monitor is connected correctly.
3.
Turn on the monitor and then the system unit. Allow the system to boot
into Windows 95 or Windows 98.
Your computer's Plug and Play code may warn you that your system
hardware has changed. This probably means that it has detected your
new monitor for the first time.
4.
Open the
D
ISPLAY
and then double clicking on the
C
P
ONTROL
ANEL
5.
Select the
S
ETTINGS
6.
Select the
C
HANGE
7.
Select the
C
HANGE
8.
Insert the Setup diskette into drive A: and select the
9.
Select
.
OK
10. Choose
IBM T85A
the diskette to your hard drive.
11. Close all open windows and remove the diskette.
12. Reboot the system.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
window by clicking on
P
ROPERTIES
tab.
button.
D
T
ISPLAY
YPE
button.
M
T
ONITOR
YPE
monitor and select
OK
,
S
S
TART
ETTINGS
icon.
D
ISPLAY
H
D
AVE
ISK
. The files will be copied from
A
UTO
,
button.
Hide quick links:
Advertisement
Table of Contents
