Configuring your Monitor
Automatic Setup
The Setup Utility included
on the setup option
diskettes are for displaying
color-bar patterns. They do not
replace or modify the display
driver.
The automatic setup
instructions require the
monitor to be warmed up for 15
minutes. This is not required for
normal operation.
Before you begin
When you first use your monitor you must perform Automatic (auto) Setup.
This procedure sets up your monitor to process the video signals from your
computer without image discoloration or flicker. After you perform auto setup,
the settings are stored and used each time you turn on the monitor.
Check the type of computer the monitor is connected to and turn to the
appropriate page as shown in the table below.
Type of Computer
PC
RS/6000
Sun Workstation
HP Workstation
Auto Setup for the PC on page 10
Auto Setup for the RS/6000 on page 14
Auto Setup for the Sun Workstation on
page 24
Auto Setup for the HP Workstation on
page 26
8
Turn to ...