IBM MICRO TOWER 2169 Hardware Maintenance Manual page 7

To Connect
1. Turn Everything OFF.
2. First, attach all cables to
devices.
3. Attach signal cables to
receptacles.
4. Attach power cord(s) to
outlet.
5. Turn device ON
NOTE:
In the U.K., by law, the telephone cable must be connected
after the power cord. When disconnecting, the power cord must
be disconnected after the telephone line cable.
To Disconnect
1. Turn Everything OFF.
2. First, remove power
cord(s) from outlet
3. Remove signal cables
from receptacles.
4. Remove all cables from
devices.
5