Table of Contents
Advertisement
006 -
ARE THE VOLTAGES CORRECT AND DOES THE
FAN RUN? (YES, READ AHEAD. NO, GO TO STEP
009)
q
The power supply is working normally.
q
If you suspect the on/off switch cable assembly, see Step
003.
q
If the fan continues to run when all connectors are plugged
back in, go to "Undetermined Problems" on page 104. If
the fan stops running when a drive connector is plugged
back in, go to "Start" on page 68.
007 -
DO YOU HAVE AN OHM READING WHEN THE
SWITCH IS PRESSED AND AN OPEN READING
WHEN THE SWITCH IS RELEASED? (YES, READ
AHEAD. NO, GO TO STEP 008)
q
Replace the on/off switch cable assembly.
008 -
q
Replace the system board.
q
End.
009 -
q
Replace the power supply.
q
End.
101
Advertisement
Table of Contents
