Detailed Info - IBM SYSTEM STORAGE DS3000 Installation Manual

Detailed Info

Click on a path in the table to display detailed information for the path in the lower half of the window. Information
is available in three tabs:

Target – Displays information for the target port that is connected to the path

Adapter - Displays information for the Celerity host adapter channel that is connected to the path

Statistics – Displays information regarding data transferred down paths
Target (DS Storage) Details
– Node – World Wide Node Name of the Target
– Target ID – Target ID presented to OS X
Port ID – Fibre Channel Port ID of the DS Storage
–
– Connected – Link Status (Yes, No)
– Read State – Status of Read Policy (Active, Alternate, Disabled)
Write State – Status of Write Policy (Active, Alternate, Disabled)
–
Detailed Adapter Info
–
Adapter Details
– Node – World Wide Node Name of the Celerity FC Adapter
Port – World Wide Port Name of the Celerity FC Adapter
–
– Port ID – Fibre Channel Port ID of the Celerity FC Adapter
– Topology – Fibre Channel Topology (PTP, AL)
– Link – Status of Fibre link (up, down)
– Link Speed – Fibre Channel Data Rate (8Gb, 4Gb, 2Gb)
Digital Media Storage Solution Installation Guide
© Copyright 2010, IBM Corporation. All rights reserved.
25