Atto Config Tool Features; Atto Os X Driver Installation - IBM SYSTEM STORAGE DS3000 Installation Manual


Multipathing is the ability to send I/O over multiple paths to the same LUN

Failover and load balancing done on a LUN basis

Monitors I/O paths – identifies changes in path status

Automatic re-routing of I/O upon detection of an interrupted connection

Failover/failback transparent to the OS or application

Increase performance by sending data over multiple paths

ATTO Config Tool Features


Allows simple Setup for the user. This is critical as IT staffs in the digital video industry are limited.

Shows the number of paths

Shows the status of each connection

Displays valuable FC Target and Initiator info (ex. WWPN, WWNN, etc)

Shows path data flow information in bytes

"Locate" button to blink the LED of the Fibre port associated with the path selected.

ATTO OS X Driver Installation


Download the latest driver file from

*** Driver does not ship with standard ATTO product ***

Double-Click the osx_drv_celerity8_131MP.dmg file

(This will create and launch the disk image)

Click continue to agree to the "Software License Agreement"

Select the "Destination drive (boot drive)" and select continue

The driver will now automatically install

Reboot the machine
Digital Media Storage Solution Installation Guide
© Copyright 2010, IBM Corporation. All rights reserved.
www.attotech.com/soultions/ibm
20