Fuel Demand Valve (Fdv) Requirement; Equipped For United States And Canada Model - TOHATSU MFS 4C Owner's Manual

4. Fuel demand valve (FDV) requirement

EQUIPPED FOR UNITED STATES
AND CANADA MODEL
The fuel demand valve prevents
pressurized fuel from entering the
engine and causing a possible fuel
spillage. The fuel demand valve has a
manual release. The manual release
can be used (pushed in) to open
(bypass) the valve in case of a fuel
blockage in the valve.
Fuel demand valve
Fuel demand valve - installed in the
fuel hose between the fuel tank and
primer bulb.
CAUTION
!
● Do not make demand valve wet with
water, gasoline or oil or, the function
will be deteriorated.
● Located demand valve in a place
that can protect it from damaging
actions such as stepping on it.
Manual release
Vent/water drain holes
PRE-OPERATING PREPARATIONS
CAUTION
!
Be sure to use EPA approved tank and
FDV as a set. Confirm shapes of EPA
approved tank and regular tank.
For U.S. and Canada model
Except for U.S. model
(EPA approved tank)
(regular tank)
17
5