Basic Call Handling - Cisco 7960 User Manual

Cisco 7960 Handset User Guide
6

Basic Call Handling:

Placing a call – Basic Options:
There are six options for placing a new call.
1. Lift the Handset and dial the number.
2. Press a Line button and dial the number.
3. Press the speaker button and dial the number.
4. Press the Headset button and dial the number.
5. Press the NewCall soft key and dial the number.
6. Press the Speed Dial button and dial the number.
Tips:
You can dial on-hook, without a dial tone (pre-dial). To pre-dial, enter a number, then go off-
•
hook by lifting the handset or by pressing Speaker or Headset.
When you pre-dial, your phone tries to anticipate the number you are dialling by displaying
•
matching numbers from your Placed Calls log. This is called Auto Dial.
If you make a mistake while dialling, press << to erase digits.
•
Answering a Call – Basic Options:
You can answer a call by simply lifting the handset, or you can use other options.
1. Lift the Handset.
2. Press a Line button.
3. Press the Speaker button.
4. Press the Headset button.
5. Press the Answer soft key.
Ending a Call – Basic Options:
To end a call, simply hang up.
1. Return the Handset to its Cradle.
2. Press the Speaker button.
3. Press the Headset button.
4. Press the EndCall soft key.
9
Last saved by PJM 15/12/2008 H:\Infrastructure Services\Network Services\IP Telephony\Documentation\Cisco IP Phone Documentation\7960 Handset User Guide.doc