Optional Vehicle Recovery System - Python 650 ESP Installation Manual

optional vehicle recovery system (VRS
No additional parts are required to add the optional VRS
the 8618 Starter Kill Relay must be installed. The VRS
deactivated with the valet switch. If the VRS
to respond to more than one pulse for maximum security. (See System Features Learn Routine section.)
to arm the VRS
1. Turn the ignition to the ON position.
2. Press
The parking light will flash once and the siren will chirp once to confirm that the VRS system is armed and will
enter the trigger sequence next time a door is opened and then closed.
to disarm the VRS
To disarm VRS (before siren begins chirping):
1. Turn the ignition to the ON position.
2. Press
The parking lights will flash twice and the siren will chirp twice to confirm that the VRS
To disarm VRS (after the siren has begun chirping):
1. Turn the ignition to the ON position.
2. Press and release the Valet
Step 2-5. (See System Features Learn Routine section of this guide.)
NOTE: For a detailed explanation to the VRS triggered sequence, refer to the Vehicle Recovery
System section of the Owner's Guide.
© 2000 Directed Electronics, Inc. Vista, CA
® feature. However for the VRS
® feature can be activated with the remote transmitter and
® option is selected it is recommended to program the Valet switch
on the transmitter for 1 second.
on the transmitter for 1 second.
® /Program switch the selected number of times programmed in
® )
® feature to be effective,
® system is disarmed.
29