Received Call Log - Icom iM423 Instruction Manual

7
DSC OPERATION
D Receiving a Test Acknowledgement Call
When a Test Acknowledgement Call is received:
The alarm sounds for 2 minutes.
➥
"RCVD TEST ACK" pops up. The LCD backlight blinks for
➥
2 minutes.
Push [ALARM OFF] to stop the alarm and the blinking
q
backlight.
• If [ALARM OFF] is not pushed within 2 minutes, the next screen
may appear, depending on the received Category.
Push a softkey to select your desired action.
w
[EXIT]
➥ Push to return to the normal operating mode.
• The transceiver exits the DSC mode.
• " " continues to blink and the Call is stored in the Received
Call Log.
63

Received Call log

■
The transceiver automatically stores up to 50 distress mes-
sages and 50 other messages, and they can be used as a
supplement to your logbook.
• While in the normal operating mode, "
corner of the LCD when there is an unread message.
D Distress message
Push [LOG] to enter "RCVD CALL LOG" in the DSC CALLS
q
menu, or you can enter it through the Menu screen.
➪ DSC Calls ➪ Received Call Log
MENU
(Push [MENU]) (Rotate Dial, then push [ENT].)
Push [ p] or [q] to select "Distress," then push [ENT].
w
• The Distress messages are stored in "Distress."
• " " appears when there are unread messages.
• " " appears when there are no unread messages.
• No icon appears when there are no messages.
" blinks in the upper right