Channel 16 Switch Function - Icom iM423 Instruction Manual

7
DSC OPERATION
D Channel 16 Switch function
By regulation, after receiving a Distress call, the transceiv-
er switches the operating channel to Channel 16. However,
when this setting is set to "OFF," the function enables the
transceiver to remain on the operating channel, even after
receiving a Distress call.
q Enter "CH 16 SWITCH" in the DSC Settings menu.
➪
MENU
(Push [MENU])
w Rotate Dial to set the Channel 16 Switch function to "Auto
(No Delay)," "10 Second Delay" or "OFF," then push [ENT].
• Push [BACK] to cancel and return to the DSC Settings menu.
67
DSC Settings ➪ CH 16 Switch
(Rotate Dial, then push [ENT].)
Auto (No Delay)
10 Second Delay : After receiving a Distress call, and
OFF
Push [EXIT] to return to the normal operating mode.
e
(default)
: After receiving a Distress call, and
[ACPT] is pushed on the confirmation
screen, the transceiver immediately
switches to Channel 16.
[ACPT] is pushed on the confirma-
tion screen, the transceiver remains
on the current operating channel for
10 seconds. After that, the transceiver
automatically switches to Channel 16.
(default)
: Even after receiving a Distress call,
the transceiver remains on the operat-
ing channel.
• " " appears.