Clock; Timer; Settings - Maytag MEW9630DS Use & Care Manual

To Set the Clock:
Before setting, make sure the oven(s) and Timer are off.
1. Press CLOCK and "CLOCK" appears in the text area.
2. Press the Temp/Time keypad to enter the desired time. The
text area will change to "Press START."
3. Press START. "Time Set" will appear in the text area. Once
the display clears, the time is set.
The Timer can be set in hours or minutes up to 9 hours and
59 minutes, and counts down the set time. The Timer does not
start or stop the oven.
To Set:
1. Press TIMER SET/OFF. "Set TIMER" will scroll down in the
text display area, and the clock will display "--:--".
2. Press the Temp/Time keypad to enter the desired Timer.
"Press TIMER" will scroll down in the text display area.
3. Press TIMER SET/OFF to start the timer. The time begins
counting down. "TIMER Started" will scroll down in the text
display area. The last minute of the timer countdown will be
displayed in seconds.
At the end of the set time, 4 tones will sound, and "TIMER
End" will be displayed.
4. Press TIMER SET/OFF to clear the display.
NOTE: A reminder beep will sound until the Timer is canceled.
To Cancel:
Press TIMER SET/OFF.

Settings

Fahrenheit and Celsius
The temperature is factory preset to Fahrenheit but can be
changed to Celsius.
1. Press SETTINGS once. "TEMP UNIT" and "FAHRENHEIT.
Press (1) for CELSIUS" will appear in the display text area.
2. Press the Temp/Time "1" keypad to change the temperature
unit.
3. "CELSIUS Selected" will scroll in the text area. The
temperature unit has been changed.
NOTE: A similar procedure can be done to return the
temperature unit to Fahrenheit.
Tones
Tones are audible signals, indicating the following:
Basic Functions
One tone
Valid pad press
Function has been entered
Oven is preheated
Three tones
Invalid pad press
Four tones
End of cycle
End of Kitchen Timer
6

Clock

Timer

Adjusting Sound On or Off
The oven sound is factory preset for On but can be changed to
Off.
1. Press SETTINGS twice. "SOUND" and "ON. Press (1) for
OFF" will appear in the display text area.
2. Press the Temp/Time "1" keypad to change the sound
setting.
3. "OFF Selected" will scroll in the text area. The sound setting
has been changed.
NOTE: A similar procedure can be done to return the sound
setting to On.
Adjusting Sound Volume
The oven sound is factory preset for High but can be changed to
Low.
1. Press SETTINGS three times. "SOUND VOLUME" and
"HIGH. Press (1) for LOW" will appear in the display text area.
2. Press the Temp/Time "1" keypad to change the sound
volume setting.
3. "LOW Selected" will scroll in the text area. The sound volume
setting has been changed.
NOTE: A similar procedure can be done to return the sound
volume setting to High.
Adjusting End Tone On or Off
The end tone is factory preset for On but can be changed to Off.
1. Press SETTINGS four times. "END TONE" and "ON. Press
(1) to OFF" will appear in the display text area.
2. Press the Temp/Time "1" pad to change the end tone setting.
3. "OFF Selected" will scroll in the text area. The end tone
setting has been changed.
NOTE: A similar procedure can be done to return the end tone
setting to On.
Adjusting Keypress Tone On or Off
The keypress tone is factory set for On but can be changed to
Off.
1. Press SETTINGS five times. "KEYPRESS TONE" and "ON.
Press (1) to OFF" will appear in the display text area.
2. Press the Temp/Time "1" pad to change the keypress tone
setting.
3. "OFF Selected" will scroll in the text area. The keypress tone
setting has been changed.
NOTE: A similar procedure can be done to return the keypress
tone setting to ON.
Adjusting Reminder Tone On or Off
The reminder tone is factory preset for On but can be changed to
Off.
1. Press SETTINGS six times. "REMINDER TONE" and "ON.
Press (1) to OFF" will appear in the display text area.
2. Press the Temp/Time "1" pad to change the reminder tone
setting.
3. "OFF Selected" will scroll in the text area. The reminder tone
setting has been changed.
NOTE: A similar procedure can be done to return the reminder
tone setting to ON.