E-Lins H685m Series User Manual page 21

Subnet Mask: 255.255.255.0
Remote Remote LAN LAN
Remote Remote LAN LAN
Select: choose input
IP Address: input remote IP address range, for example the VPN server router IP is 192.168.10.254, so here
For the sever IP (remote IP), you can fill in the server IP address or server's DDNS.
Subnet Mask: 255.255.255.0
password: password: password: password:
Dynamic Dynamic Dynamic Dynamic IP: IP: IP: IP:
After configuration, save it and re-power on the router. Then the router will connect the VPN by IPSec.
Then you can find at "VPN—IPSEC status" the similar following pictures, which means the IPSec VPN is
connected successfully.
4.2.2 4.2.2 4.2.2 4.2.2 C C C C onfig onfig onfig onfigure ure ure Router ure
Notes: this is not recommended. We recommend use CISCO VPN Server Router as a VPN server.
Configure 3g Router parameters as below.
Choose "Server", and click "Add VPN Setting" button to enter.
Tel: +86 (755) 33231620 E-mail:
we put 192.168.10.0
the same with in the server, this is unique with the user name from the VPN server
router.
Dynamic IP means opposite maybe Dial-up connection, so no input IP Address.
Router Router as Router as as IPSec as IPSec IPSec IPSec S S S S erver
E-Lins Technology Co.,Limited
sales@szelins.com sales@e-lins.com
E-Lins H685m Series Router User Manual
erver erver erver
www.szelins.com