E-Lins H685m Series User Manual page 43

At "The log server address", fill in the server's IP address.
This feature normally requires a syslog tool at the server side.
With this feature, the sys log will be record to the server syslog tool.
Please see example at chapter ""
9.4 9.4 Reboot Reboot Time Time
9.4 9.4 Reboot Reboot Time Time Setting
The H685m router has the following feature to keep alive:
1) built-in watch dog (automatically, no need set)
2) LCP check during dialing and connected (automatically, no need set)
3) DNS check (need manually set this feature)
4) Reboot automatically (need manually set this feature)
Why need use "reboot" feature? Each machine/device's performance will be weaker and weaker after it power
on. Then in order to keep the router keep the good performance as long as it can, it will automatically reboot to
refresh the working. The setting is as follows,
Click "Firewall--Options"
At "The reboot time (hour)", fill in the hour number.
The value can be 1~23. Recommend value is 12~23.
For example we set is as 12.
A. the router will reboot automatically after every 12 hours to keep the stability performance if we don't set the
Tel: +86 (755) 33231620 E-mail:
Setting Setting
Setting
E-Lins Technology Co.,Limited
sales@szelins.com sales@e-lins.com
E-Lins H685m Series Router User Manual
www.szelins.com