E-Lins H685m Series User Manual page 51

Step 3) It will show the following if the user creating is successful.
Step 4) VPN—PPTP,
PPTP client. The Beginning IP and Ending IP range must be the same range with the router. For example, the
router's IP is 192.168.0.254, then you can put
After setting, please do not forget click "Apply" button and re-power on the router.
B. B. B. B. PPTP PPTP PPTP Client Client side side setup. . . . setup setup
PPTP Client Client side side setup
There are two types. Users can take PC VPN dialup as client. Also we can take H685m router as client. We
test it one by one. Users can make your own choice.
B1. B1. PC PC VPN VPN dialup dialup
B1. B1. PC PC VPN VPN dialup dialup as
Step 1) Get the PPTP server's WAN IP. Here we get the H685m PPTP server WAN IP is 113.115.216.52,
at the PC, try to ping it and check if it's through. If cannot through, please check if your ISP block the IP, or the
PPTP server get some problem.
Tel: +86 (755) 33231620 E-mail:
Enable PPTP
click , and fill in
Beginning IP
as as VPN VPN client. client.
as VPN VPN client. client.
E-Lins Technology Co.,Limited
sales@szelins.com sales@e-lins.com
E-Lins H685m Series Router User Manual
Beginning IP Ending IP,
and
as 192.168.0.110 and
which will be assigned to
Ending IP as 192.168.0.200
www.szelins.com