E-Lins H685m Series User Manual page 18

After finishing the configuration, click "Save Button", then Click "Reboot Button".
Recommend to re-power on the router after saving.
Once the router is online, it will get WAN IP at System Info page. See the following example.
Notes: (Only for TD-SCDMA version router)
if the router's module is
select will be different from other modem type.
e. Network select: must select
d. APN: must with the format of the following parameters. CMNET is the real APN, you can choose the right
one with your Network Provider. For other modem type, just fill in the APN parameter directly.
After finishing the configuration, click "Save Button", then Click "Reboot Button".
4.1. 4.1.3 3 3 3 Module 4.1. Module Module Modem Modem
4.1. Module Modem Modem Network
The H685m series router is built-in module inside already. Here to set the module working mode.
Notes: This feature is for manual compulsive operation for the module. For normal use, please keep the
parameters as default because the module is already "AUTO mode".
4.1.3.1. At "WAN Port configuration page", fill in related parameter at "Modem Info"
Tel: +86 (755) 33231620 E-mail:
TD-SCDMA Type A or TD-SCDMA Type B,
NULL
Network Network
Network Mode
E-Lins Technology Co.,Limited
sales@szelins.com sales@e-lins.com
E-Lins H685m Series Router User Manual
the parameter
Mode Mode Info Info C C C C onfiguration Info onfiguration onfiguration
Mode Info onfiguration
d. APN , and the parameter
www.szelins.com
e. Network