Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Mastech MS6460
Summary of Contents for Mastech MS6460
- Page 1 MS6460 Laser Distance Meter User's Manual...
-
Page 2: Safety Regulations
Don't make the meter's laser device radiate eyes or other body parts of you or others. Don't make the laser device radiate high reflective object surface. Safety Regulations Electromagnetic radiation of the Please read carefully safety regulations meter may interfere with others and guidance before initial use. - Page 3 Install battery, display and Display keyboard Install and replace Battery power indication Laser transmitting Store data, view stored data battery Measuring basis Menu Backlight indication Maximum indication Indication for area, volume, Pythagorean Auxiliary theorem and indirect display area measurement Measurement Minimum indication unit indication Main display area...
-
Page 4: Backlight Setting
Turn on meter, menu setting Length Area Volume 0.000m 0.000m 0.000m Turn on and off meter 0.00m 0.00m 0.00m 0.0in 0.00ft 0.00ft In the Off mode, press key, the meter 0.00ft 0.00ft 0.00ft and laser will start at the same time, the meter enters test mode. - Page 5 Measuring basis setting Continuous measurement: In the Test mode, long press key to Press key to exchange front basis enter the continuous measurement and end basis, it is end basis by default. state, the maximum measurement value Distance measurement, area, and the minimum measurement value will display on the screen during the volume, Pythagorean indirect...
- Page 6 Indirect measurement with Press key to clear the previous Pythagorean theorem result, measure it again Area measurement: In the meter, there are three default modes to measure single distance of Press key, will display on the triangle with Pythagorean theorem. screen, one edge of cube is flashing, Users can make indirect measurements complete the following operations...
- Page 7 Press key to measure the length of 2) Press key twice. On the screen: the hypotenuse with dotted line in the erect side is flashing. figure (b) Press key, measure the length of Press key to measure the length of one of legs with dotted line according another hypotenuse with dotted line in to prompts on the screen (a)
- Page 8 3 seconds, the current measurement Add/subtract measurement data will be automatically stored in the function: meter memory. MS6460 can store 20 Cumulative or inverse cumulative pcs at most. operation can be done for single Browse recordings: distance measurement with add/subtract operation.
-
Page 9: Prompt Messages
Prompt messages: Technical parameters In the course of using the meter, the Item MS6460 following messages may display in the main display area Maximum 60m/164ft measurement distance Message Cause Distance Solutions ±2mm measurement accuracy Measure target Too poor signal point with strong... - Page 10 Daily maintenance of meter Single measurement Maximum battery life for 4000 times Storage temperature range • Do not place the meter in hot and -20°C-60°C Operating temperature range 0°C-40°C humid environment to store for long Storage humidity RH85% time. If the meter is not used for long Battery 1.5V 3*AAA time, please remove the battery and...
-
Page 11: Packing List
Packing list When purchasing the meter, please carefully check the following list to see whether all attachments of the meter are complete ? Item Name Unit Quantity Main engine Portable bag of meter String AAA Battery User Manual Certificate of Approval Gift box HYS006887...
Need help?
Do you have a question about the MS6460 and is the answer not in the manual?
Questions and answers