Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Mastech MS6460
Summary of Contents for Mastech MS6460
- Page 1 MS6460 Laser Distance Meter User's Manual...
-
Page 2: Safety Regulations
It is strictly prohibited to shoot eyes >1/4 S or other parts of body with the laser; it is not allowed take the laser to shoot any objects' surface with strong reflecting. Safety Regulations Please read the safety regulations and Due to electromagnetic radiation operation guide carefully before operating. -
Page 3: Display Screen
Display Screen Installation and replacement of battery • Laser emission on • Battery power instructions • Store data/check stored data • Measurement • Maximum instructions • Instructions of area, Volume, Pythagorean proposition and • Auxiliary display indirect measurement • Discharge the battery door on the •... -
Page 4: Backlight Setting
Start and shut off the meter Optional units as below: Length Area Volume Under off state, press key, instrument 0.000m 0.000m 0.000m and laser get starting simultaneously 0.00m 0.00m 0.00m and stand by for measurement. 0.0in 0.00ft 0.00ft Under on state, long press key for 3 0.00ft 0.00ft... -
Page 5: Area Measurement
Press key to remove previous Continuous Measurement: measured result and get ready for the Long press key under measuring next measurement. mode to enter into continuous Volumetric Measurement: measurement state, and maximum and minimum measurement results in Double press key and you will see the process of continuous measurement on the display screen, that is cube with will display on the screen. - Page 6 Pythagorean proposition indirect measurement: There are three kinds of pre-designed measuring mode to get unilateral 2) Double press key and you will see distance of triangle by ways 66 on the display screen, that is triangle of Pythagorean proposition. This is with vertical leg flashing convenient for users to do indirect Press...
- Page 7 Under Pythagorean proposition Press key to firstly measure the length (a) of dotted line hypotenuse measurement mode, length of right side according to screen prompt must be shorter than hypotenuse length Press key to measure the length(b) so that instrument can make out calculation, otherwise the instrument of dotted line hypotenuse (shown as in the figure...
- Page 8 Store Measurements Add And Subtract Measurement: Single distance measurement can be Under measuring mode, as the exiting done through adding/subtracting to get data is effective, long press key for 3 seconds, the very measurement data accumulated add or subtract operation; will be automatically stored into the Press key, and "+"appears on main...
-
Page 9: Technology Specifications
Tips: Technology specifications: During operation, tip information may ITEM LDM-50 LDM-60 LDM-70 LDM-80 LDM-100 appear on the main display screen Max measured distance 100m as follows: Distance measurement ±2mm precision Information Cause Solutions Measurement unit options mm/in/ft Measure target locations Continuous measure- ment function Signal too weak... - Page 10 Instrument maintenancetions: Automatically cut off laser Automatic shutdown 150S • The meter should not be stored in high Storage temperature -20℃-60℃ temperature and strong humidity Working temperature 0 -40℃ ℃ environment for long-term; if not used Storage humidity RH85% for long time, please take out the Battery 1.5V 3*AAA battery and place the meter in the...
-
Page 11: Packing List
Packing list Please carefully check instruments and attachments are complete in line with below list. Item Unit Note Laser Distance Unit Meter master body Instrument portable piece Holding rope piece AAA battery copy Manual copy Warrantycertifcate Gift box Outdoor target Only LDM-100 refectionboard Checked by:...
Need help?
Do you have a question about the MS6460 and is the answer not in the manual?
Questions and answers