Download Print this page
Mastech MS6252B Operation Manual

Mastech MS6252B Operation Manual

Digital anemometer

Advertisement

Quick Links

Digital Anemometer
Operation Manual
°C
DP
°F
WB
% RH
MAX
MIN
VEL FLOW AREA
FPM CMM
knots
ft/s
CFM CMS
m/s
km/h
MS6252B
Digital Anemometer
FUNC
MAX
UNIT
MIN
MS6252B
USB
m
2
ft
2
x10
ft/m
ml/h
HOLE
MODE
USB

Advertisement

loading
Need help?

Need help?

Do you have a question about the MS6252B and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Mastech MS6252B

  • Page 1 MS6252B Digital Anemometer Operation Manual °C °F % RH VEL FLOW AREA FPM CMM knots ft/s ft/m CFM CMS ml/h km/h MS6252B Digital Anemometer HOLE FUNC MODE UNIT...
  • Page 2 CONTENTS CONTENTS 1. Safety Information......1 4. Operating Guidance......11 1.1 Preparation........1 4.1 Power On/Off........11 1.2 Usage..........1 4.2 Reading hold ........11 1.3 Marking..........1 4.3 Backlight function......12 1.4 Maintenance........2 4.4 Wind speed measurement....12 4.5 Wind speed unit selection....13 2. Description..........3 4.6 Area setting........13 2.1 Part name..........3 4.7 Air volume measurement....13 2.2 Button description......6...
  • Page 4 (5) “UNIT” — Unit switching button FPM CMM knots ft/s ft/m CFM CMS km/h ml/h (6) Maximum/Minimum button MS6252B Digital Anemometer (7) “HOLD/MODE” hold display, switch temperature mode HOLE (8) “ /USB” — Backlight/USB real time data FUNC MODE uploading functions...
  • Page 6 2.3 Sign definition 3. SPECIFICATION Indicates Auto Power-Off status The meter should be recalibrated under the condition Reading hold state of 18°C~28°C, relative humidity <75% every year. Wind speed measurement state 3.1 General FLOW Air volume measurement state AREA Area setting required by air volume 3.1.1 Work height: Maximum 2000m Indicates that the current mode is dew point 3.1.2 Work mode:...
  • Page 10 enable the USB function of the meter. 4.13 Replacing battery 5.The PC software displays data and diagrams. 4.13.1 If the “ ”sign appears, this indicates that 6. Save or print data. the battery should be replaced. 4.13.2 Power off the meter and remove the battery cover.