Automatic Shutdown And Continuous Operation Mode Selection - Aktakom ??M-1130 User Manual

АМM-1130

Automatic Shutdown and Continuous Operation Mode Selection

After turning on power, the meter will in default enter the auto-shutdown timing state. Within 15 minutes after stopping to press
any key or turn the rotary switch, the meter will automatically turn off. After auto-shutdown, by pressing the FUNC. key or
turning the rotary switch it is possible to wake the meter to resume operation. If you want the meter operates continuously
without shutdown, it will be done by pressing the PC-LINK key.
Notes: After auto-shutdown there will still be a little electricity consumption in the meter, so it is recommended to turn off the power when
the meter is to remain un-working for a long time.
Connected to Computer by USB Interface
Pressing the PC-LINK key, the meter will begin to send the measured data and state to computer while the LCD display screen
displaying . Then it will be able to record, analyze, draw and print all the measurement on computer as long as you
insert one end of the USB cable (options) into the front socket of the meter and another end into the computer USB interface
and run the record and graphics software (options).And press the PC-LINK key again, the meter will stop to send data to
computer, symbol on the LCD display screen will go out. When the meter sends data to computer it will cause the
increase of the electricity consumption. So should be turned off when no need to transmit data.
36