Safety Information; Rules For Safe Operation - Aktakom ACM-2353 User Manual

Clamp meters
Table of Contents

Advertisement

Safety Information

This Meter complies with the standards IEC61010: in
pollution degree 2, overvoltage category (CAT. III
600V, CAT IV 300V) and double insulation.
CAT. III: Distribution level, fixed installation, with
smaller transient overvoltages than CAT. IV CAT.IV:
Primary supply level, overhead lines, cable systems
etc.
Use the Meter only as specified in this operating
manual, otherwise the protection provided by the
Meter may be impaired.
In this manual, a Warning identifies conditions and
actions that pose hazards to the user, or may damage
the Meter or the equipment under test.
A Note identifies the information that user should pay
attention to.

Rules For Safe Operation

Warning
To avoid possible electric shock or personal injury,
and to avoid possible damage to the Meter or to the
equipment under test, adhere to the following rules:
z Before using the Meter inspect the case. Do not
use the Meter if it is damaged or the case (or part of
3

Advertisement

Table of Contents
loading

Table of Contents