Table of Contents
Advertisement
Installation manual
•
rFS
Room and floor sensor
•
FS
Floor sensor
•
RS
Room sensor
•
See descriptions of the possible sensor configurations in
section 2.1.
Press to confirm.
Select the desired maximum floor temperature.
•
(This does not apply if the thermostat is configured to use a
room sensor only.)
Press to confirm.
•
To protect the cables, the maximum floor temperature is
factory preset to 35 °C.
Notice:
The floor temperature is measured where the sensor is
placed. The temperature of the bottom of a wooden floor
can be up to 10 degrees higher than the top. Floor manufac-
tures often specify the max. temperature on the top surface
of the floor.
Please contact your floor supplier for maximum surface
temperature.
INT
23
Hide quick links:
Advertisement
Table of Contents
