Connection Utility Page - AMX Modero NXD-500i Operation/Reference Manual

Setup Pages and Descriptions

Connection Utility Page

The options on the Connection Utility page allows the panel to be used as a site survey tool. While in this
page, move around the wireless network coverage area to check for any weak points within the spaces
between the WAPs (FIG. 55).
FIG. 55 Connection Utility page
Features on this page include:
Connection Utility Page
Close:
Connection Status icon:
Connection Information
Master IP
Panel IP
Connection Statistics
Messages Sent
Responses Received
Responses Missed
74
Closes the Connection Utility popup.
The icon in the upper-right corner of the utility provides a constant visual i
indication of current connection status.
A message is sent to the master once per second and expects a response.
• If it is received, the button stays green.
• If it is missed, the button goes yellow.
• After three misses (3 seconds), it will go red until a response from the master
is received, and then it will be green again.
Once per second, a user can know if the immediate area is a good wireless
area (all green), an area of limited coverage (lots of yellow, some green, some
red), or an area with no coverage (all red).
The IP Address for the connected master.
The IP Address for the panel.
The number of messages sent from the panel to the master.
The number of responses the panel has received from the master.
The number of expected responses from the master to the panel missed.
NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom