Introduction; Features; Before You Begin; System Requirements - StarTech.com PCIIDE2 Instruction Manual

2 port pci ata-133 ide adapter card

Hide thumbs Also See for PCIIDE2:

Table of Contents

I I n n t t r r o o d d u u c c t t i i o o n n

Thank you for purchasing a StarTech.com ATA/133 IDE controller card. This product is

perfect for adding additional hard drives and other IDE/ATAPI compliant devices to a

computer that does not have any available IDE connections, replacing a failed onboard

IDE controller, or upgrading a computer to take advantage of ATA/133 speeds.

• Two independent DMA/ATA channels

• Compliant with PCI Specification rev. 2.2, PCI ATA Controller Specification rev 1.0

• Supports up to four DMA/ATA devices

• 256 Bytes buffer

WARNING! PCI cards, like all computer equipment, can be severely damaged by static

electricity. Be sure that you are properly grounded before opening your computer case or

touching your PCI card. StarTech.com recommends that you wear an anti-static strap

when installing any computer component. If an anti-static strap is unavailable, discharge

yourself of any static electricity build-up by touching a large grounded metal surface

(such as the computer case) for several seconds. Also be careful to handle the PCI card

by its edges and not the gold connectors.

• A Pentium-based computer with an available PCI slot

• Windows (98SE, ME, NT, 2000, XP) Linux

This package should contain:

• 1 x PCI ATA/133 IDE PCI Controller Card

• 1 x 40-pin, 80-wire IDE Data Cable

• 1 x Driver CD

• 1 x Installation Guide

Instruction Manual

Table of Contents