Static Wep Settings - AMX Modero NXD-1000Vi Operation/Reference Manual

Firmware Pages and Descriptions
Open security does not utilize any encryption methodology, but requires an SSID (alpha-numeric) entry.
This entry must match the Network Name (SSID) entry of the target WAP so the panel knows what
device it is using to communicate with the network.
Open (Clear Text) Settings
SSID (Service Set Identifier):
Save/Cancel:

Static WEP Settings

Press the Static WEP button to open the Static WEP Settings page (FIG. 77).
FIG. 77 Wireless Settings page - Static WEP Settings
96
Opens an on-screen keyboard to enter the SSID name used on the target
WAP.
The SSID is a unique name used by the WAP, and is assigned to all panels
on that network. An SSID is required by the WAP before the panel is permit-
ted to join the network.
• The SSID is case sensitive and must not exceed 32 characters.
• Make sure this setting is the same for all points in your wireless network.
• NXA-WAP200Gs use AMX as their default SSID.
• If this field is left blank, the panel will attempt to connect to the first available
WAP.
• Save - store the new security information, apply changes, and return to the
previous page.
• Cancel - discard changes and return to the previous page.
Refer to the Configuring a Wireless Network Access section on page 45 for further details on
these security options.
Refer to the Using the Site Survey tool section on page 46.
10" Modero Widescreen Touch Panels