Honeywell ADEMCO MX8000 Installation And Operation Manual page 184

MX8000 Installation and Operation Guide
Program Mode
Choices
Options
MX8000–
LC3
3 Line
(con-
tinued)
Line Device
Menu
(continued)
MX8000–
LRR
MX8000–
LC1
1 Line
A–6
Table A–1: Programming Quick Chart
Choices Choices
BFSK Auto
3/1 Restore
Ademco 4/2 Out
Auto Opt
FBI
Pulse Extended
Edit Line
+ Extended Out
Line #
Transmit Gain
(con-
Receive Gain
tinued)
CID Monitor
Line Gain
Opt
CID Gain
On Hook Gain
Ringer Imped
Use Choose
Defaults Device(s) #
Copy
Copy Device # of
Device(s)
Existing Source Device
Clear Device #
Device(s)
View Device #
Device(s)
Add
Device # Use Defaults
Device
Central
00-FF
Station #
Odd/Even
Odd/Even
Network
Edit Line
+
VPN Yes/No
Line #
A/B
A/B
Network
Monitor
Yes/No
Station Flag
Use Choose
Defaults Device(s) #
Copy
Copy Choose Device
Device(s)
Existing # of Source
Device
Clear Choose
Device(s) Device #
View Choose
Device(s) Device #
Use Defaults
Add
Device #
Device
Copy Existing
Handshake
Sequence
Handshake
Group
Edit Line
Handshake
Handshake
+
Sequence
Delay
Line #
Handshake
Duration
Handshake
Wait
Handshake Ack
Duration
(cont'd)
Choices Choices
HiSpeed or 4/2
HiSpeed or 3/1
Normal or HiSpeed
S/Fast or LAR300
Extended or Not Ext.
HiSpeed or 4/2
–3 to –14dB
0 to 12dB in 3dB steps
Norm, Pream, DTMF, or
Marks
–6 to 7dB in steps
2 to 7dB in steps
Hi or Sy
Choose the target
Device(s) #.
Choose the target
Device(s) #.
1 through 6
1400_2300–2, 1400Hz,
2300Hz, 2225Hz,
Modem II, Modem IIE,
Westec, 1400_2300Hz,
or Unused
0-255 in 50ms periods
0-255 in 10ms periods
0-255 in 50ms periods
0-255 in 10ms periods
Comments
See Section 5.5.2.6 for details
See Section 5.5.2.7 for details.
Choose Device(s) # that you wish to be
programmed to factory defaults.
Copy the programming of one Device
(source) and paste it into one or several
(target) Device(s).
See Section 5.5.6 for details.
See Section 5.5.7 for details.
See Section 5.5.1 for details.
Choose Device(s) # that you wish to be
programmed to factory defaults.
Copy the programming of one Device
(source) and paste it into one or several
(target) Device(s).
See Section 5.5.6 for details.
See Section 5.5.7 for details.
See Section 5.5.1 for details.
See Section 5.5.4.1 for details.