The Intensity Software Installer Will Install The Following Components For You - Blackmagicdesign Intensity Pro Operation Manual

Installation for Capture and Playback
Installing the software for Mac OS X
Contents

The Intensity software installer will install the following components for you:

Blackmagic Intensity drivers.
Blackmagic QuickTime codecs.
™
Final Cut Pro Easy Setups, presets and enablers.
™
Blackmagic Disk Speed Test.
Blackmagic On-Air for live production.
Note: Before installing any software or hardware you will need administrator privileges. Make sure
that your applications such as Final Cut Pro are installed before running the Intensity installer. If you
want to use the included On-Air software for live mixing you will need to install two Intensity cards,
as one is used for each of the two connected HDMI cameras.
Intensity software
1. The CD supplied with your Intensity Pro contains the Intensity software. Before you install, check
you have the latest driver. Visit www.blackmagic-design.com/support/software
2. Open the "Intensity Installer" disk image and launch the "Intensity Installer" application.
3. Click , and
Continue Agree Install
4. Now restart your machine to enable the new software drivers.
Using for Capture and Playback
buttons and the drivers will be installed on your system.
Intensity Installer components.
Follow install prompts.
Restart your Mac!
7