Technical Settings; Reinstallation Mode; Testing The Connection - Danfoss living connect Installation And User Manual

4. Technical settings

4.1 Reinstallation mode

If the thermostat has been removed from the radiator
UK
and needs to be reinstalled (after being used), it is
necessary to activate installation mode to prevent
DE
damage to the thermostat.
To enter installation mode:
DK
NL
Press
Press
M flashes.
Reinstall the thermostat on the valve.
Press
Please also refer to section 6 regarding removal of the thermostat from the
radiator valve.

4.2 Testing the connection

Press
displayed.
Press until LI is displayed.
Press
LI disappears when the connection is made.
If no connection can be made, the alarm
and antenna symbols flash together.
Refer to "Troubleshooting" at www.danfoss.com/
living
10
until M is displayed.
to withdraw the spindle.
for approx. 3 seconds to exit.
for at least 3 seconds until M is
to make the connection.
living connect®