Table of Contents
Advertisement
TECHNICAL SPECIFICATIONS
OVATION 214 Supply:
-
115/230 VAC (-18%, +8%), 50/60Hz, L1 same phases as Stage 1
and
2,
F12-1A fast blow.
Stage 1: Variable output, 115 VAC (3/4 HP) / 230 VAC (1.5 HP), Mot.10A,
50/60 Hz, fuse F1-15A slow blow.
Stage 2: Variable output, 115 VAC (3/4 HP) / 230 VAC (1.5 HP), Mot.10A,
50/60 Hz, fuse F2-15A slow blow.
Stage 3: ON-OFF output, 115 / 230 VAC, 30VDC, 50 / 60 Hz, Mot.10A,
heating or cooling, fuse F7-15A slow blow.
Stage 4:
ON-OFF output, 115 / 230 VAC, 30VDC, 50 / 60 Hz, Mot.10A,
heating or cooling, fuse F8-15A slow blow.
Curtain output:
winch output, fuse F3-5A slow blow.
Heater 1:
115 VAC (3/4 HP) / 230 VAC (1.5 HP), Mot.10A, 50/60 Hz, fuse
F10-15A slow blow.
Mist / Heater 2:
Hz, fuse F9-15A slow blow.
Alarm: ON-OFF output, 3A, 115/230 VAC, 30VDC, fuse F11-3A slow blow.
Low voltage ( < 5V), isolated from the supply. Operating range:
Probes:
-40.0°F to 120.0°F (-40.0°C to 48.9°C). Accuracy: 1.8°F (1°C) between
41°F and 95°F (5°C and 35°C).
Enclosure: ABS, moisture and dust-tight.
The room temperature where the controller is located
MUST ALWAYS REMAIN BETWEEN 32° AND 104°F (0°
AND 40°C).
overload
and
OPEN-CLOSE output, 115/230 VAC, 60 Hz, 30VDC, 5A
115 VAC (3/4 HP) / 230 VAC (1.5 HP), Mot.10A, 50/60
OVATION 214
overvoltage
protection
OVATION 214 rev.00
fuse
59
Advertisement
Table of Contents
