Table of Contents
Advertisement
OVATION 214
Viewing Min/Max Probe Temperatures
5
Follow this procedure to see the lowest and highest temperature read-
ings that have been recorded by each probe since the last reset.
•
Set the function to PROBE TEMP / MIN / MAX. The tem-
perature reading of probe 1 is displayed, alternating with the
letters "Pr 1" and the on/off state of the probe.
•
Turn the adjustment knob clockwise by one notch. The maxi-
mum temperature of probe 1 is displayed, alternating with
the letters "Pr1 Hi".
•
Turn the adjustment knob counterclockwise one notch. The
current temperature of probe 1 is displayed once again.
•
Turn the adjustment knob counterclockwise one notch fur-
ther. The minimum temperature of probe 1 flashes on the
display, alternating with the letters "Pr1 Lo".
•
Turn the adjustment knob clockwise by one notch. The cur-
rent temperature of probe 1 is displayed once again.
•
Press the push-button to select another probe then proceed
as explained above to see the minimum and maximum tem-
perature readings of the desired probe.
NOTE: If you let the display flash for more than 10 seconds, the
controller resets the minimum and maximum temperatures of the
selected probe (the display stops flashing to indicate that the reset
has been done).
16
OVATION 214 rev.00
Advertisement
Table of Contents
