Table of Contents

Advertisement

PRECAUTIONS

We strongly recommend installing supplementary natural ven-
tilation as well as a back-up thermostat on at least one cooling
stage (refer to the wiring diagram enclosed with this user's
manual to connect the thermostat).
Although fuses at the input and outputs of the controller
protect its circuits in case of an overload or overvoltage,
we recommend installing an additional protection device on
the controller's supply circuit.
The room temperature where the controller is located MUST
ALWAYS REMAIN BETWEEN 32°F AND 104°F (0°C TO
40°C).
To avoid exposing the controller to harmful gases or exces-
sive humidity, it is preferable to install it in a corridor.
DO NOT SPRAY WATER ON THE CONTROLLER
FOR CUSTOMER USE
Enter the serial number located on the
side of the controller below for future
reference.
Model number:
Serial number:
OVATION 214
OVATION 214
OVATION 214 rev.00
3

Advertisement

Table of Contents
loading

Table of Contents