Receiving Stored Channels; Storing The Desired Sports Team (Sirius Only); Storing While Receiving A Game Broadcast; Game Alert Setup - Alpine CDA-9886 Quick Reference Manual

INITIAL:
UPDATE:
3
Repeat the procedure to store up to 5 other channels
onto the same band.
• To use this procedll1'1' Fir other bands. simply seleer the band desired
and repeat the procedure.
• A
total of 18 channels can be stored ill the preset memory for either
XM or SIRIUS. 6 Challnels are stored in ellch balld (X I. X2 lind X3
for XM; 51. 52 lind S3!t)r SIRIUS).
• Ifvou store
II
channel in a preset mell101Y which already has a
.I'{(/tion. the current channel will be cleared and replaced with the
new one.
Receiving Stored Channels
1
Press
BAND
to select the desired band.
2
Press the channel preset button (1 through 6)
that has your desired satellite channel in memory.
Storing the desired Sports Team (SIRIUS only)
Store a favorite team from one of the available leagues SIRIUS covers.
Once stored. game times and scores for that team are announced using
the intermption ALERT display while receiving other programming. To
receive these announcements, refer to page 20.
This function becomes effective after performing the following two
operations.
Storing\V~ile recei~ir'lga
9;inne brpadca'st
j
1
Select the channel broadcasting your favorite team's
game.
2
Press F/SETUP to activate the MEMORYIDELETE
selection mode.
3
Turn the Rotary encoder to select the MEMORY
mode, and then press C\/ENT.
MEMORY
H
DELETE
H
MEMORY
4
Turn the Rotary encoder to select the desired team
for the game being broadcast, and then press
C\/ENT.
5
Turn the Rotary encoder to select interruption
type, and then press C\ lENT.
TYPE INITIAL H TYPE UPDATE (Initial setting)
The ALERT display interrupts when the
game begins.
The ALERT display interrupts by game
progress (change of score. game result.
etc)
6
Press and hold
~
lESe for at least 2 seconds to
return to normal mode.
• Ifyou tl)' to store ",hen the memory area isJilled. "MEMORY FULL"
is displaved. If you want to replace a team that's alreadv been sal'ed
ill stl'!' 4. tum the Rotary encoder to select "REPlACE YES." and
then press
C\
lENT.
• If 110 operatioll is perftirm ./iiI' 10 secolIlIs. the setting mode is
canceled.
20-EN
Game Alert Setup'
1
Press and hold F/SETUP for at least 2 seconds to
enter the SETUP mode.
2
Turn the Rotary encoder to select GAME ALERT,
and then press C\ lENT.
3
Turn the Rotary encoder to select the desired
league, and then press C\ lENT.
4
Turn the Rotary encoder to select a team you want
to store, and then press C\ lENT.
5
Turn the Rotary encoder to select an interruption
type, and then press C\ lENT.
TYPE INITIAL H TYPE UPDATE (Initial setting)
TYPE INITIAL: The ALERT display interrupts when the
game begins.
TYPE UPDATE: The ALERT display interrupts by game
progress (change of score, game result,
etc.).
6
Press and hold F/SETUP for at least 2 seconds to
cancel the SETUP mode.
• Pressing ~ IESC returns to the previous SETUP mode.
• If 110 operation is peifOlwed for 60 seconds. SETUP is canceled.
• In this mode, a total of 4 teams can be stored in the preset memOlY
(one team per league).
Storing the desired Song
I
Artist (SIRIUS only)
A stored song title or artist name is announced whenever a matching
title or artist is found on another channel. The intermption ALERT is
displayed while listening to a program on another channel. For
receiving intermption information, refer to "Recalling the stored
information (SIRIUS only)" (page 21).
1
Press F/SETUP to active the MEMORYIDELETE
selection mode when a Song or the song of an Artist
you want to store is being broadcast.
2
Turn the Rotary encoder to select the Memory
mode, and then press C\/ENT.
MEMORY
H
DELETE
3
Turn the Rotary encoder to select the SONG
MEMORY or ARTIST MEMO, and then press
C\/ENT.
4
Press and hold
~
lESe for at least 2 seconds to
return to normal mode.
• IIvou tl)' to store when the memory area isfil/ed, "MEMORY FULL"
is displayed. If yo
II
want to replace a Song title or Artist name that's
already been saved in step
3.
till'll the Rotary encoder to select
"REPlACE YES." alld then press C\IENT.
• Ifllo operatioll is peiformfor 10 seconds. the seuing lI10de is
canceled.
INITIAL:
UPDATE:
3
Repeat the procedure to store up to 5 other channels
onto the same band.
• To use this procedll1'1' Fir other bands. simply select the band desired
and repeat the procedure.
• A
total of 18 channels can be stored ill the preset memory for either
XM or SIRIUS. 6 Challnels are stored in ellch balld (X I. X2 lind X3
for XM; 51. 52 lind S3!t)r SIRIUS).
• Ifvou store
II
channel in a preset mel/lOlY which already has a
.I'{(/tion. the current channel will be cleared and replaced with the
new one.
Receiving Stored Channels
1
Press
BAND
to select the desired band.
2
Press the channel preset button (1 through 6)
that has your desired satellite channel in memory.
Storing the desired Sports Team (SIRIUS only)
Store a favorite team from one of the available leagues SIRIUS covers.
Once stored. game times and scores for that team are announced using
the intermption ALERT display while receiving other programming. To
receive these announcements, refer to page 20.
This function becomes effective after performing the following two
operations.
Storing\V~ile recei~ir'lga
9;inne brpadca'st
j
1
Select the channel broadcasting your favorite team's
game.
2
Press F/SETUP to activate the MEMORYIDELETE
selection mode.
3
Turn the Rotary encoder to select the MEMORY
mode, and then press C\/ENT.
MEMORY
H
DELETE
H
MEMORY
4
Turn the Rotary encoder to select the desired team
for the game being broadcast, and then press
C\/ENT.
5
Turn the Rotary encoder to select interruption
type, and then press C\ lENT.
TYPE INITIAL H TYPE UPDATE (Initial setting)
The ALERT display interrupts when the
game begins.
The ALERT display interrupts by game
progress (change of score. game result.
etc)
6
Press and hold
~
lESe for at least 2 seconds to
return to normal mode.
• Ifyou tl)' to store ",hen the memory area isJilled. "MEMORY FULL"
is disfilaved. If you want to replace a team that's alreadv been sal'ed
ill stl'!' 4. tum the Rotary encoder to select "REPlACE YES." and
then press
C\
lENT.
• If
110
operatioll is per/tirm ./iiI' 10 secolIlIs. the setting mode is
canceled.
20-EN
Game Alert Setup'
1
Press and hold F/SETUP for at least 2 seconds to
enter the SETUP mode.
2
Turn the Rotary encoder to select GAME ALERT,
and then press C\ lENT.
3
Turn the Rotary encoder to select the desired
league, and then press C\ lENT.
4
Turn the Rotary encoder to select a team you want
to store, and then press C\ lENT.
5
Turn the Rotary encoder to select an interruption
type, and then press C\ lENT.
TYPE INITIAL H TYPE UPDATE (Initial setting)
TYPE INITIAL: The ALERT display interrupts when the
game begins.
TYPE UPDATE: The ALERT display interrupts by game
progress (change of score, game result,
etc.).
6
Press and hold F/SETUP for at least 2 seconds to
cancel the SETUP mode.
• Pressing ~ IESC returns to the previous SETUP mode.
• If
110
operation is peifOlwed for 60 seconds. SETUP is canceled.
• In this mode. a total of 4 teams can be stored in the preset memOlY
(one team per league).
Storing the desired Song
I
Artist (SIRIUS only)
A stored song title or artist name is announced whenever a matching
title or artist is found on another channel. The intermption ALERT is
displayed while listening to a program on another channel. For
receiving intermption information, refer to "Recalling the stored
information (SIRIUS only)" (page 21).
1
Press F/SETUP to active the MEMORYIDELETE
selection mode when a Song or the song of an Artist
you want to store is being broadcast.
2
Turn the Rotary encoder to select the Memory
mode, and then press C\/ENT.
MEMORY
H
DELETE
3
Turn the Rotary encoder to select the SONG
MEMORY or ARTIST MEMO, and then press
C\/ENT.
4
Press and hold
~
lESe for at least 2 seconds to
return to normal mode.
• IIvou tl)' to store when the memory area is filled. "MEMORY FULL"
is displayed. If yo
/I
want to replace a Song title or Artist name that's
already been saved in step
3.
t/ll'll the Rotary encoder to select
"REPlACE YES." alld then press C\IENT.
• !fIlO
operatioll is peiformfor 10 seconds. the seuing I/Iode is
canceled.