Level/Balance (Between Left And Right)/Fader (Between Front And; Setting The Subwoofer Level; Setting The Bass Control; Setting The Bass Center Frequency - Alpine CDA-9886 Quick Reference Manual

Setting the Subwoofer level
You can change the Subwoofer Level to create your own tonal
preference.
1
Press SOUND SETUP to activate the Sound Setting
mode.
2
Turn the Rotary encoder to select the SUBW
LEVEL Adjustment mode, and then press
~
lENT.
SUBW LEVEL*l
H
BASS*2
H
TREBLE*2
H
HPF*2
H
SUBWLEVEL
3 Turn the Rotary encoder to select the desired
subwoofer level (0-+15).
• Ifno operation is peiformedfor 15 seconds. the unit will return to
normal mode automatically.
• When subwoofer is set to OFF and DEFEAT is set to ON. pressing
the SOUND SETUP button momentarily will not be functional.
*'
When the subwoofer mode is set to OFF, its level cannot be adjusted.
refer to "Turning Subwoofer ON/OFF" (page 14).
The adjustment can also be made by pressing Rotary encoder
(AUDIO). Refer to "Adjusting Subwoofer Level/Bass Leve/ITreble
Level/Balance (Between Left and Right)/Fader (Between Front and
Rear)/Defeat" (page 12).
~ The function is inoperable when DEFEAT is set to ON.
Setting the Bass Control
You can change the Bass Frequency emphasis to create your own tonal
preference.
1
Press SOUND SETUP
to
activate the Sound Setting
mode.
2
Turn the Rotary encoder to select the BASS
Adjustment mode, and then press
~
lENT.
SUBW LEVEL*]
H
BASS*4
H
TREBLE*4
H
HPF*4
H
SUBWLEVEL
3-1 Press BAND to select the desired bass center
frequency.
80 Hz -) 100 Hz -) 200 Hz -) 60 Hz -) 80 Hz
Emphasizes the displayed bass frequency ranges.
3-2 Press SOURCE/<!> to select the desired bass
bandwidth.
Changes the boosted bass bandwidth to wide or narrow. A
wider setting will boost a wide range of frequencies above
and below the center frequency. A narrower setting will
boost only frequencies near the center frequency.
3-3*-'Turn the Rotary encoder to select the desired
bass level (-7-+7).
You can emphasize or weaken the bass level.
4
Press and hold
~
IESC for at least 2 seconds to
return to normal mode.
• If
no operation is peiformed for 15 seconds. the unit will return to
normal mode automatically.
• The bass level settings will be individually memorizedfor each
source (FM. AM. CD. etc.) until the setting is changed. The bass
frequency and bass bandwidth settings adjusted for one source are
effective for all other sources (FM. AM. CD. etc.).
• Depending on the connected devices. some functions and display
indications do not work. However, Bass Level is still adjustable
if
an
audio processor with the Bass function is connected.
• When subwoofer is set to OFF and DEFEAT is set to ON. pressing
the SOUND SETUP button momentarily will not be functional.
*]
When the subwoofer mode is set to OFF, its level cannot be adjusted.
Refer to "Turning Subwoofer ON/OFF" (page 14).
04 The function is inoperable when DEFEAT is set to ON.
*5 The adjustment can also be made by pressing Rotary encoder
(AUDIO). Refer to "Adjusting Subwoofer Level/Bass Leve/ITreble
Level/Balance (Between Left and Right)/Fader (Between Front and
Rear)/Defeat" (page 12).
Setting the Treble Control
You can change the Treble Frequency emphasis to create your own tonal
preference.
1
Press SOUND SETUP to activate the Sound Setting
mode.
2
Turn the Rotary encoder to select the TREBLE
Adjustment mode, and then press
~
lENT.
SUBW LEVEL*6
H
BASS*7
H
TREBLE*7
H
HPF*7
H
SUBW LEVEL
3-1 Press BAND to select the desired treble center
frequency.
10.0 kHz -) 12.5 kHz -) 150 kHz -) 175 kHz -)10.0 kHz
Emphasizes the displayed treble frequency ranges.
3-2*8Turn the Rotary encoder to select the desired
treble level (-7-+7).
You can emphasize or weaken the treble level.
4
Press and hold
~
IESC for at least 2 seconds to
return to normal mode.
• If
no operation is peiformed for 15 seconds. the unit will return to
normal mode automatically.
• The treble level settings will be individually memorized for each
source (FM. AM. CD. etc.) until the setting is changed. The Treble
frequency settings adjusted for one source are effective for all other
sources (FM. AM. CD, etc.).
13-EN
Setting the Subwoofer level
You can change the Subwoofer Level to create your own tonal
preference.
1
Press SOUND SETUP to activate the Sound Setting
mode.
2
Turn the Rotary encoder to select the SUBW
LEVEL Adjustment mode, and then press
~
lENT.
SUBW LEVEL*l
H
BASS*2
H
TREBLE*2
H
HPF*2
H
SUBWLEVEL
3 Turn the Rotary encoder to select the desired
subwoofer level (0-+15).
• Ifno operation is peiformedfor 15 seconds. the unit will return to
normal mode automatically.
• When subwoofer is set to OFF and DEFEAT is set to ON. pressing
the SOUND SETUP button momentarily will not be functional.
*'
When the subwoofer mode is set to OFF, its level cannot be adjusted.
refer to "Turning Subwoofer ON/OFF" (page 14).
The adjustment can also be made by pressing Rotary encoder
(AUDIO). Refer to "Adjusting Subwoofer Level/Bass LevellTreble
Level/Balance (Between Left and Right)/Fader (Between Front and
Rear)/Defeat" (page 12).
~ The function is inoperable when DEFEAT is set to ON.
Setting the Bass Control
You can change the Bass Frequency emphasis to create your own tonal
preference.
1
Press SOUND SETUP
to
activate the Sound Setting
mode.
2
Turn the Rotary encoder to select the BASS
Adjustment mode, and then press
~
lENT.
SUBW LEVEL*]
H
BASS*4
H
TREBLE*4
H
HPF*4
H
SUBWLEVEL
3-1 Press BAND to select the desired bass center
frequency.
80 Hz -) 100 Hz -) 200 Hz -) 60 Hz -) 80 Hz
Emphasizes the displayed bass frequency ranges.
3-2 Press SOURCE/<!> to select the desired bass
bandwidth.
Changes the boosted bass bandwidth to wide or narrow. A
wider setting will boost a wide range of frequencies above
and below the center frequency. A narrower setting will
boost only frequencies near the center frequency.
3-3*-'Turn the Rotary encoder to select the desired
bass level (-7-+7).
You can emphasize or weaken the bass level.
4
Press and hold
~
IESC for at least 2 seconds to
return to normal mode.
• If
no operation is peiformed for 15 seconds. the unit will return to
normal mode automatically.
• The bass level settings will be individually memorizedfor each
source (FM. AM. CD. etc.) until the setting is changed. The bass
frequency and bass bandwidth settings adjusted for one source are
effective for all other sources (FM. AM. CD. etc.).
• Depending on the connected devices. some functions and display
indications do not work. However, Bass Level is still adjustable
if
an
audio processor with the Bass function is connected.
• When subwoofer is set to OFF and DEFEAT is set to ON. pressing
the SOUND SETUP button momentarily will not be functional.
*]
When the subwoofer mode is set to OFF, its level cannot be adjusted.
Refer to "Turning Subwoofer ON/OFF" (page 14).
04 The function is inoperable when DEFEAT is set to ON.
*5 The adjustment can also be made by pressing Rotary encoder
(AUDIO). Refer to "Adjusting Subwoofer Level/Bass LevellTreble
Level/Balance (Between Left and Right)/Fader (Between Front and
Rear)/Defeat" (page 12).
Setting the Treble Control
You can change the Treble Frequency emphasis to create your own tonal
preference.
1
Press SOUND SETUP to activate the Sound Setting
mode.
2
Turn the Rotary encoder to select the TREBLE
Adjustment mode, and then press
~
lENT.
SUBW LEVEL*6
H
BASS*7
H
TREBLE*7
H
HPF*7
H
SUBW LEVEL
3-1 Press BAND to select the desired treble center
frequency.
10.0 kHz -) 12.5 kHz -) 150 kHz -) 175 kHz -)10.0 kHz
Emphasizes the displayed treble frequency ranges.
3-2*8Turn the Rotary encoder to select the desired
treble level (-7-+7).
You can emphasize or weaken the treble level.
4
Press and hold
~
IESC for at least 2 seconds to
return to normal mode.
• If
no operation is peiformed for 15 seconds. the unit will return to
normal mode automatically.
• The treble level settings will be individually memorized for each
source (FM. AM. CD. etc.) until the setting is changed. The Treble
frequency settings adjusted for one source are effective for all other
sources (FM. AM. CD, etc.).
13-EN