Using Sound Effects; Enhancing The Sound From The Center Speaker: Center Focus; Adjusting The Amount Of Bass: Subwoofer Level; Enhancing The Surround Sound Effect: Surround Enhancer - Panasonic SC-PT350W Operating Instructions Manual

Using sound effects

Note
• The following sound effects may not be available
or have no effect depending on the type of
source, disc as well as recording format or, when
headphones are used.
• You may experience a reduction in sound quality
when these sound effects are used with some
sources. If this occurs, turn the sound effects off.
• It is not possible to turn on Surround Enhancer, EQ
and Super Surround at the same time.
Enhancing the sound from the center speaker:
Center Focus
This applies to discs where the dialogue is
recorded in the center channel.
You can make the sound of the center speaker
seem like it is coming from within the television.
C FOCUS ON
• This also works when Dolby Pro Logic II is
turned on.

Adjusting the amount of bass: Subwoofer level

You can adjust the amount of bass. The unit
automatically selects the most suitable setting
according to the type of playback source.
• When AV, AUX or Digital In source is selected
SUB W 1 (factory preset)
SUB W 4
• When another source is selected
SUB W 2 (factory preset)
SUB W 1
• To check the current setting, press [SW.LEVEL].
• The setting you make is retained, and recalled
every time you play the same type of source.
RQTX0059-B_Out_new6.indd 31 RQTX0059-B_Out_new6.indd 31
C FOCUS OFF
SUB W 2
SUB W 3
SUB W 3
SUB W 4
Enhancing the surround sound effect:
Surround Enhancer
Automatically adjusts each speaker to enhance
the surround sound effect of multi-channel audio.
When playing two-channel audio, the audio of the
L/R front speakers is also output through the rest
of the speakers creating a surround sound effect.
(Press and hold)
SRD ENH ON

Changing the sound quality: Equalizer Mode (EQ)

HEAVY : Adds punch to rock.
CLEAR : Clarifi es higher sounds.
SOFT : For background music.
FLAT : Cancel (no effect is added) (factory
preset).
• To check the current setting, press [-EQ].
• You can adjust the volume of the surround
speakers to get the best surround effect
(\ page 32, Adjusting the volume of each
speaker: Speaker level adjustments).
• It is not possible to turn on EQ and Sound
Enhancer at the same time.
Factory preset when AV, AUX or Digital In source
is selected.

Enhancing the stereo sound: Super Surround

Movie : Use this mode when playing movie
software.
Music : Adds surround effects to stereo sources.
Off : Cancel
This works only in FM, AV, Music P. and AUX
•
mode.
Super Surround and EQ can be turned on
•
simultaneously.
SRD ENH OFF
3/5/07 3:27:12 PM 3/5/07 3:27:12 PM
31
RQT8043