Panasonic SC-PT350W Operating Instructions Manual page 23

Other Settings (continued)
7
Picture Menu (continued)
Picture Adjustment
Contrast
Brightness
Sharpness
Colour
Gamma
Depth Enhancer : Reduces the
Video To select suitable picture quality
Output with your television
Mode (Video recordings will be converted to,
and output as, high-defi nition video.)
When HDMI connection is being used
and "Video Mode" (\ page 27, "HDMI"
tab) is set to "On"
480p/576p/720p/1080p
*
(progressive)
480i/576i/1080i (interlace)
*
• Select a video output with an "
mark. The "
video output is acceptable with your
television.
• Selecting a video output without an
" " mark can result in the picture
✱
being distorted.
If the picture is distorted, press and
hold [CANCEL] until the picture is
displayed correctly. (The output will
return to "576p" or "480p".)
• Output from the COMPONENT
VIDEO OUT terminals will be "480i"
or "576i".
When HDMI connection is not being
used and "Video Mode" (\ page 27,
"HDMI" tab) is set to "Off"
When you select "xxx
and a confi rmation screen appears,
select "Yes" only if connecting to a
progressive output compatible
television.
The numbers displayed depend on
*
the disc being played. One of the
above numbers is displayed.
RQTX0059-B_Out_new6.indd 23 RQTX0059-B_Out_new6.indd 23
: Increases the
contrast between
light and dark
parts of the
picture.
: Brightens the
picture.
: Adjusts the
sharpness of the
edges of horizontal
lines.
: Adjusts the shade
of the picture's
color.
: Adjusts the
brightness of dark
parts.
rough noise in the
background to give
a greater feeling of
depth.
"
✱
" mark shows that the
✱
480p/576p (progressive)
*
480i/576i (interlace)
*
p" (progressive)
*
Transfer If you have chosen "xxx p"
Mode (progressive) or "1080i" (interlace)
( see left, "Video Output Mode),
select the method of conversion for
progressive output to suit the type of
material.
• The setting will return to Auto or
Auto1 when the disc tray is opened,
the unit is turned off or another
source is selected.
When playing PAL discs or video
contents
Auto : Automatically detects the
fi lm and video content, and
appropriately converts it.
Video : Select when using Auto, and
the content is distorted.
Film : Select this if the
edges of the fi lm
content appear
jagged or rough
when Auto is selected.
However, if the video content
is distorted as shown in the
illustration to the right, then
select Auto.
When playing NTSC discs
Auto1 : Automatically detects the
fi lm and video content, and
appropriately converts it.
Auto2 : In addition to Auto1,
automatically detects fi lm
contents with different frame
rates and appropriately
converts it.
Video : Select when using Auto1 and
Auto2, and the content is
distorted.
HD This works when the HDMI connection
Picture is being used and "Video Mode"
Enhancer (\ page 27, "HDMI" tab) is set to "On".
To sharpen the "720p", "1080i" and
"1080p" picture quality
Off 1 2
HDMI This works when the HDMI connection
Colour is being used and "Video Mode"
Space (\ page 27, "HDMI" tab) is set to "On".
To select suitable picture colour
with your television
RGB
YCbCr (4:4:4)
YCbCr (4:2:2)
• If the setting above is not compatible
with your television, it will not be
displayed.
• "RGB Range" (\ page 27, "HDMI"
tab) is available when "RGB" is
selected.
3 (sharpest picture)
3/5/07 3:27:07 PM 3/5/07 3:27:07 PM
23
RQT8043