Page 1
Setup Guide Setup Guide Operating Instructions DVD Home Theater Sound System SC-PT350W Model No. Preparing the remote control Placement of speakers Wireless system connection Simple setup Connect to the power supply. Connect to the antenna. Connect to the speakers. Connect to the various television terminals.
Accessories Please check and identify the supplied accessories. 1 Remote control 1 FM indoor antenna 2 AC mains leads (RSA0007-L) (K2CT3CA00004) (N2QAYB000093) 2 Remote control batteries 1 Antenna plug adaptor (K1YZ02000013) 1 Sheet of speaker cable stickers Preparing the remote control Do not: •...
Page 3
Placement of speakers Setup example Place the front, center, and surround speakers at approximately the same distance from the seating position. The angles in the diagram are approximate. CENTER FRONT SURROUND (L, R) (L, R) Main unit (with digital transmitter) SUBWOOFER WIRELESS SYSTEM...
Placement of speakers (continued) Use only supplied speakers Note • Using other speakers can damage the unit, and • You can damage your speakers and shorten their sound quality will be negatively affected. useful life if you play sound at high levels over •...
Wireless system connection Connect the surround speaker cables to the wireless system Connect the surround speaker cables to the wireless system Do not insert the wires beyond the wire Click! insulation (\ page 6). +: White −: Blue 4 SURROUND (R) SURROUND 3 SURROUND (L) SURROUND...
Simple setup Making the connections Making the connections Connect the AC mains lead only after all other connections have been made. • Ensure that you have the complete accessories before making the connections. Conserving power The main unit consumes a small amount of power, even when it is standby mode (approx. 0.8 W). To save power when the unit is not to be used for a long time, unplug it from the household mains socket.
Page 7
• Make the extra audio connection (\ page 34, Operations brand of television. Guide) when you use “HDAVI Control” function. • It is recommended that you use Panasonic’s HDMI cable. [Recommended part number: RP-CDHG15 (1.5 m), RP-CDHG30 (3.0 m), RP-CDHG50 (5.0 m), etc.] •...
Performing QUICK SETUP The QUICK SETUP screen assists you to make necessary settings. To display the picture from this main unit, switch on the television and change the television’s input mode which is connected to this main unit (example: VIDEO 1, AV 1, etc.). To change your television’s input mode, refer to its operating instructions.
Operating other equipment Optional antenna connection Optional antenna connection Use the outdoor antenna if radio reception is poor. FM outdoor antenna (Using a television antenna) FM outdoor antenna (not included) Rear panel of this main unit 75 coaxial cable (not included) Antenna plug adaptor (included) •...
Page 10
Operating other equipment (continued) Optional connection for set top box Optional connection for set top box Set top box Television (not included) (not included) Optical-In for 5.1 ch Rear panel of surround this main unit This unit can decode the surround signal from the set top box.
Connecting with your HDMI-compatible television and set top box Connecting with your HDMI-compatible television and set top box • Do not use the SCART cable when the HDMI cable is being used for connection. • When the HDMI cable is connected, there will be no video output from the SCART and COMPONENT VIDEO OUT terminals of the main unit.
Page 12
Matsushita Electric Industrial Co., Ltd. Web Site: http://panasonic.net RQTX0060-B L0307NC0...