Removing Housing; Upper Housing - Epson Stylus C58 Service Manual

Epson Stylus C58/C59/ME 2/C79/D78/C90/C91/C92/D92/T20/T20E/T23/T26/S20/T10/T11/ME 30/T21/T24/T27/S21

4.3 Removing Housing

4.3.1 Upper Housing

Part/Unit that should be removed before removing Upper Housing
None
Removal Procedure
When releasing the tabs on the sides, be careful not to scratch the
C A U T I O N
surface with a screwdriver. The coating is fragile and can be easily
damaged.
1. Remove the screws (x2) on the back of the printer.
2. While releasing the tab (x1) on the back, release the tabs (x2) on both sides of
the printer with a flathead screwdriver.
±
C.B.S 3X6 (Torque: 6 1Kgf.cm)
Figure 4-3. Removing Upper Housing (1)
DISASSEMBLY/ASSEMBLY
3. Push the marked area ( )to release the tabs (x2,
printer (Arrows
4. Push the dotted area ( ) from inside as shown in the figure
tab (x1, ) in the middle.
Push here
Upper Housing
Push here from inside
Figure 4-4. Removing Upper Housing (2)
5. Remove the Upper Housing taking care not to scratch the Hopper with the
tabs.
:Tab
Figure 4-5. Removing Upper Housing (3)
Removing Housing
) on the front side of the
).
Hopper
Revision E
to release the
Push here
Upper Housing
Upper Housing
38
Confidential