Ld Roller/Asf Unit - Epson Stylus C58 Service Manual

Epson Stylus C58/C59/ME 2/C79/D78/C90/C91/C92/D92/T20/T20E/T23/T26/S20/T10/T11/ME 30/T21/T24/T27/S21

4.5.10 LD Roller/ASF Unit

Part/Unit that should be removed before removing LD Roller/ASF Unit
Upper Housing /Hopper /Main Board /Main Frame /EJ Frame Assy. /
Print Head /CR Scale/CR Motor/CR Unit/Timing Belt/Ink System
Removal procedure
Preparation for LD Roller Removal
1. Rotate the LD Roller until the flat part faces upwards.
2. Insert a tweezer or a screwdriver into the slot as shown in the figure to hold
the Paper Back Lever outwards.
3. Move the Carriage Lock Lever outwards.
Paper Back Lever
LD Roller
Tweezer
Flat part
Figure 4-65. Preparation (1)
DISASSEMBLY/ASSEMBLY
Carriage
Lock Lever
Carriage
Lock Lever
Disassembling Printer Mechanism
LD Roller Removal
Be cautious of the following points.
C A U T I O N
Do not touch the LD Roller with bare hands.
Do not touch the roller of ASF Unit with bare hands.
4. Release the tabs (x2) of the LD Roller shaft from the bearing, and loosen the
shaft.
Tabs
Figure 4-66. Removing LD Roller (1)
5. Pull out the LD Roller shaft from the frame of the ASF Unit and remove the
LD Roller.
Figure 4-67. Removing LD Roller (2)
Revision E
LD Roller
Frame of ASF Unit
LD Roller
Confidential
59