Operation Guide; Begin Programming; Security For Your Programs - Stairville LC-48 Owner's Manual

Operation Guide

Begin Programming

Record Enable
1. Press and hold down the Record button.
2. While holding down the Record button, tap the Flash buttons 1, 6, 6
and 8 in sequence.
3. Release the Record button, the Record LED lights up, now you can
begin programming your chase patterns.
NOTE: The first time you turn on your unit, the default setting of the
Record Code is Flash buttons 1, 6, 6 and 8.
You may change the Record Code to protect your programs.

Security for your Programs

To protect your programs from any editing by others, you may change the
Record Code.
1. Enter current Record Code (Flash buttons 1, 6, 6 and 8).
2. Press and hold down the Record and Edit buttons at a time.
3. While holding the Record and Edit buttons, tap the desired Flash
button to enter a new Record Code. The Record Code consists of 4
Flash buttons (the same button or different buttons), be sure your new
Record Code consists of 4 Flash buttons.
4. Enter your new Record Code a second time, all channel LEDs and
scene LEDs will flash three times, now the Record Code is changed.
5. Exit Record mode. Tap the Rec Exit button while pressing and holding
down the Record button, release the two buttons at a time, the Record
mode is disengaged.
www.thomann.de
9