Table of Contents
Advertisement
9
Troubleshooting
For step-by-step product support, visit
Interactive Troubleshooting and Repairs. Select FAQs to learn how to perform a
Diagnostic test (identifies common problems).
Printing problems
If...
Try the following
IMPORTANT: Use only Kodak color cartridge & paper kits (with
Paper does not
feed
(Paper light may
I
glow red)
I
I
1
Multiple sheets
of paper are
2
pulled through
printer
3
4
www.kodak.com/go/support
symbol) for your printer dock. Do not use inkjet paper.
The paper-tray may be empty. Load paper
then press
.
Check the paper:
1
Remove the paper-tray
2
Inspect the paper supply. Make sure the paper is not damaged.
Replace with new paper, if necessary.
3
Carefully "fan" the paper to keep the sheets from sticking together.
4
Reload the tray. Do not load more than 30 sheets of paper
upper limit line,
5
Re-install the tray, then press
Clean the paper-feed rollers
Remove the paper-tray
Remove the paper supply from the tray. Carefully "fan" the paper to
keep the sheets from sticking together.
Reload the tray. Do not load more than 30 sheets of paper
upper limit line,
Re-install the tray, then press
www.kodak.com/go/g600support
(page
6).
, inside tray)
.
to resume printing.
(page
39).
(page
6).
, inside tray)
.
to resume printing.
and select
(page
4), re-install the tray,
(see
(see
41
Hide quick links:
Advertisement
Table of Contents
