Kodak EasyShare G600 User Manual page 50

Troubleshooting
If... Try the following
IMPORTANT: Use only Kodak color cartridge & paper kits (with
Print is too
light or under-
exposed
I
I
I
I
I
I
Print is too dark,
overexposed, or
discolored
I
I
I
I
I
I
I
44
symbol) for your printer dock. Do not use inkjet paper.
Load the paper with the Kodak logo facing down. Reload the paper, if
necessary (page 4).
Turn the flash off, then take the picture. See your camera user's guide for
details.
Adjust the exposure compensation on the camera, then take the picture.
See your camera user's guide for details.
Move so the distance between you and the subject is within the effective
flash range, then take the picture. See your camera user's guide for
details.
Edit the picture using Kodak EasyShare software on your computer. See
the EasyShare software Help for details.
Reposition the camera for more available light, then take the picture. See
your camera user's guide for details.
Use fill flash or change your position so light is not behind the subject,
then take the picture. See your camera user's guide for details.
Turn the flash on, then take the picture. See your camera user's guide for
details.
Adjust the exposure compensation on your camera, then take the picture.
See your camera user's guide for details.
Move so the distance between you and the subject is within the effective
flash range, then take the picture. See your camera user's guide for
details.
Edit the picture using Kodak EasyShare software on your computer. See
the EasyShare software Help for details.
Move the printer dock from direct sunlight; operate in a
temperature-controlled environment.
Do not block the cooling vents on your printer dock; keep them clean
(page 1).
www.kodak.com/go/support