Attaching The Custom Camera Insert - Kodak EasyShare G600 User Manual

Getting started
Paper
Keep the paper away from direct sunlight and out of high-temperature
I
environments (such as a vehicle parked in the sun).

Attaching the custom camera insert

IMPORTANT: Use the custom insert that came with your digital camera to dock the
camera. Depending on your camera connector, you may need the Kodak
dock adapter kit D-26. See the instructions included with the dock adapter.
2
To avoid fingerprints on the paper, handle it by the
I
edges. Do not touch the glossy side of the paper.
To store paper, remove the tray and close the cover
I
and door to keep out dust and debris. Store paper
flat.
I Place the insert tabs into the back slots of the dock.
I Then press the front tabs down and snap into place.
Purchase a custom camera insert for your Kodak
EasyShare digital camera and other accessories at
www.kodak.com/go/accessories.
www.kodak.com/go/support