Kodak EasyShare G600 User Manual page 58

Printer dock
Hide thumbs Also See for EasyShare G600:
Table of Contents

Advertisement

Troubleshooting
Print button/light
Light status
Light glows green
Light blinks green
Light is off
Transfer button/light
Light status
Light glows green
52
Cause
Printer dock ready for printing.
Printer dock printing.
No pictures in the camera or on
the memory card.
Camera not properly seated on
the connector.
Camera transferring pictures to
the computer; established active
connection to the computer.
PictBridge compatible device
connected.
Cause
Printer dock ready for
transferring pictures.
Action/solution
None required.
None required.
To enable Print:
1
Take pictures.
2
Dock the camera.
Reseat the camera on the printer
dock
(page
7).
None required.
None required.
The Print button is disabled; print
command is controlled from the
PictBridge compatible device. To
print from another source, unplug
the PictBridge compatible device.
Action/solution
None required.
www.kodak.com/go/support

Advertisement

Table of Contents
loading

Table of Contents