Bryant Evolution Connex SYSTXBBECW01 Installation Instructions Manual page 66

indicator lights will begin to blink (LAN Activity, Wi- - Fi Activity and WAN/Internet
Activity).
Verify the signal strength of the wireless access point radio signal at the desired
location of the Evolution Connex Control with a wireless laptop computer or
mobile phone with Wi- - Fi network scanning capabilities. Use the Scan for Wireless
Networks utility and verify that the signal for "MyHVACxxxxxx" is "Strong" or
better. If not, reposition the wireless access point to provide a strong signal at the
wall control location.
7.2. Connect the Evolution Connex Control to the Wireless
Access Point
Touch the WIRELESS icon from the second page of the Evolution Connex Control
MENU screen. First, enable the Wi- - Fi connection by touching the ENABLE
button.
Verify that the Wi- - Fi connection is enabled, by noting that ENABLED is
S
highlighted in green.
Touch SETUP A WI- - FI CONNECTION to begin the process.
S
Next, touch SCAN FOR AVAILABLE ACCESS POINTS.
S
58
A12483