Decorative Backplate - Bryant Evolution Connex SYSTXBBECW01 Installation Instructions Manual

NOTE: Once Evolution Control is secured to wall with the backplate assembly
(snapped together), care must be taken not to bend or break the interlocking tabs
when removing.
4.5.1.

Decorative Backplate

Sold separately, a thin decorative backplate is available to hide any marks/screw
holes left from the previous thermostat. This decorative backplate (or beauty ring)
is used by snapping it onto the back of the mounting plate before securing the plate
to the wall.
12
A12215
A12213