Mounting - Bryant Evolution Connex SYSTXBBECW01 Installation Instructions Manual

PERSONAL INJURY HAZARD
Failure to follow this caution may result in personal injury.
To prevent possible damage to the Damper Control Module,
DO NOT mount on plenum, ductwork, or flush against
furnace or fan coil.
4.5.

Mounting

First become familiar with all plastic assembly pieces shown on the following page.
The Evolution Connex Control will snap together with the backplate. A backplate is
supplied. Attach backplate using only a small hole in the wall allowing a four wire
connection to pass through. Mount the assembly to the backplate.
CAUTION
!
11
A12214