Non-programmable temperature controller (47 pages)
Summary of Contents for Bryant Evolution Connex SYSTXBBECW01
Page 1
SYSTXBBECW01 & SYSTXBBECN01 Evolutionr Connext Control Owner’s Manual A12479 NOTE: Read the entire instruction manual before starting the installation. US Patents: Carrier U.S. Pat No. 7,243,004, Carrier U.S. Pat No. 7,775,452, pointSETt U.S. Pat No. 7,415,102...
INTRODUCTION CONGRATULATIONS! Your decision to choose the EvolutionR Connext Control puts you in a select group of homeowners who understand the value of precise comfort control and appreciate the simplicity of an easy- to- use, intuitive, control. Your new Evolution Connex Control offers high quality comfort technology. Please take a few moments to carefully read through this manual.
Information Buttons On the bottom of some screens will be an information icon. By pressing the information icon, a text box will display to show what interactions are available on that particular screen. To close the text box, press the information icon again. FIGURE PLACE HOLDER A12103 MAIN SCREEN...
If HEAT is selected then the Evolution Connex Control operates only the heating system. If COOL is selected then the Evolution Connex Control operates only the cooling system. If FAN ONLY is selected, then the Evolution Connex Control operates the indoor fan. Set Day and Time To set the day and time for your home screen enter the main screen by touching anywhere on the control.
Use the Up (Y) and Down (B) buttons to change the time to temporar- ily hold the desired temperature in 15 minute increments. When the correct time interval is displayed, touch DONE. To return to the scheduled program, touch HOLD UNTIL, and then select PER SCHEDULE.
To return to the scheduled program, touch HOLD UNTIL, and then select PER SCHEDULE. Adjust Temperature (Permanent Hold) The Evolution Connex Control allows you to permanently override your programmed schedule by adjusting the indoor temperature at any time to meet your needs.
Adjusting Cooling To adjust the cooling temperature, enter the main screen by touching anywhere on the control. With the system in either AUTO or COOL mode, use the Up (Y) and Down (B) buttons to set the desired temperature. On the left hand side of the screen, the comfort profile will switch to MANUAL.
In the drop down menu you will see your measured humidity levels within the conditioned space. MENU SCREEN Your menu screen offers more features and control for your Evolution Connex Control. Touch the menu button at the bottom right of the main screen. Comfort Profiles You will need to set the comfort profiles before you attempt to program your new Evolution Connex Control.
The AWAY profile provides an extra feature called Smart Setback. It allows the Evolutionr System to dynamically determine the away temperature automatically to save the most amount of money, yet reach your comfort settings when you return home. Use the Up (Y) and Down (B) buttons to change the fan settings and temperature settings.
Choosing WINDOW PROTECT, the system will pick the right settings to keep condensate from forming on your windows, based on the outdoor temperature and the quality of your windows. Press SAVE when finished, or CANCEL to discard any changes. Next, select your desired humidity level during cooling by touching COOLING HUMIDITY.
selections. Select COMFORT PROFILES, then select the HUMIDITY AND FRESH AIR PROFILES option. Touch AWAY to set your humidity settings while you are away from home to save the most amount of energy. If you have a humidifier installed for your system, touch HEAT- ING HUMIDITY to set the desired humidity level when you are away home.
You will have the option of choosing between AUTO, MANUAL, or OFF. The AUTO setting will allow the system to choose the fresh air setting in a range of Low, Medium or High, as selected by you. The MANUAL setting allows you to select the percentage of fresh air to supply to your home.
A12488 Schedule Yourself To set a specific day use the Left (A) and Right (") buttons beside the day names. If you wish to copy this schedule to other days, touch COPY above the day. Select the days you wish to have the same schedule, then touch COPY.
If you wish to copy this schedule to a different zone, touch COPY above the zone name. Select the zones you wish to have the same schedule, then press COPY. Guide Me through Scheduling The Guide Me through Scheduling feature will prompt you with simple questions to help set a schedule that meets your desired comfort level and lifestyle.
Page 18
You will then be asked what time you will return to your home. Use the Up (Y) and Down (B) buttons to set the time you return home. After you have selected the correct time, touch NEXT to continue. 5. If you select YES or have completed the previous steps, the next question will ask if you want different sleep settings.
Upload My Schedule The Upload my Schedule feature will allow you to update your schedules from a PC or MAC computer, load those schedules onto a USB memory device, and upload the schedules into the Evolution Connex Control. To download the MyEvolution application for your computer, sign into the MyEvolution website at HYPERLINK “http://www.myevolutioncon- nex.com”...
folder and file have been placed correctly on the USB device, you will be asked if you wish to upload the schedule. Select YES. When successful, press NEXT. Set Time and Date The TIME/DATE icon allows you to set the time and date for your Evolution Connex Control.
A12106 Operating Status The operating status menu gives a quick look at the status of your EvolutionR Heating and Cooling System. A12504 Within the operating status, you can view which function is operating, and what stage the heating or cooling equipment is in. When you are finished looking at the operating status, press the DONE button to return to the previous menu.
To reset the counter for your installed accessory, touch the RESET but- ton, then press SAVE. To return to the previous menu, press CANCEL. A12108 Zone Status (if applicable) Zone status allows you to take a quick look at the actual temperatures, and temperature set points for each zone in your system.
A12109 Vacation Settings Touch the VACATION icon in order to set a prolonged vacation schedule. A12489 Touch PLAN VACATION to begin your vacation schedule. Use the Up (Y) and Down (B) buttons to set the time and date of when your vacation begins;...
Review your vacation schedule to make sure it is accurate. If it is cor- rect, touch SAVE to complete your vacation schedule. A12110 Wireless Set- up (if applicable) With the appropriate model, the EvolutionR Connext Control can connect to your in home Wi- Fi to connect your Evolution System to the Internet.
Page 25
Bryant Heating & Cooling Systems makes no representations or warranties, express or implied, including, to the extent permitted by applicable law, any implied warranty of merchantability or fitness for a particular purpose or use, about the compatibility of the user’s computer/network, or mobile device, with the EvolutionR Connext...
Page 26
A12115 Select the myHVACxxxxxx connection from the list, then touch NEXT (myHVAC is followed by the last 6 digits of your Wireless Access Point’s MAC address; see the label on the bottom of the TP- LINK Wire- less Access Point). SSID &...
Page 27
A12116 Use the on screen keyboard to enter the Wi- Fi security key, then touch NEXT. Touch in the security key area, and the keyboard will appear. The security key can be found on the back of the TP- LINK Wire- less Access Point.
Page 28
A12118 After your control has connected to the network, go to www.myevolution.com to register the unit and begin remote access. This requires the MAC address and serial number of the EvolutionR Con- next Wall Control, NOT the Wireless Access Point. To find the serial number and MAC address of the Evolution Connex Wall Control, click on Menu, Down Arrow, Wireless and View My Evolutionr Info.
A12491 Screen Lock The screen may be locked by selecting the screen lock icon. A message will pop up asking if you want to proceed with the screen lock. Selecting Yes will lock the screen and take you back to the home screen. To unlock the screen, touch the padlock for 10 seconds.
A12492 Weather Forecast When the EvolutionR Connext Control is connected to a Wi- Fi network, use the WEATHER icon to retrieve the weather forecast based your postal code. A12493 To enter your postal code, touch CHANGE CURRENT LOCATION. Next, select your country (United States, Canada, or Mexico). To enter your postal code, touch in the blank area;...
Your dealer information is easily accessible and probably programmed in your control. Select the SERVICE icon from the menu screen. Either your dealer’s contact information or the Bryant Customer Service number, 1- 800- 428- 4326, will appear. This information will also appear if your system requires service.
A12495 Use the PC application to upload the photo on the control and save it to a standard USB drive. Go to https://www.myevolution.com and select the EvolutionR Connext Control and click the downloads tab to down- load the MyEvolution application for either PC or MAC. Install the software on your computer, then go to the Menu and select Photo Ex- port.
A12496 You have the option of choosing a pop- up reminder for your air filter, humidifier, UV lights, or ventilator pre- filter. To enable a reminder, touch YES. After you have selected your desired reminders, touch SAVE. Display With the Evolution Connex Control, you can change aspects of the display for your personal preferences.
To allow a photo to act as a screen saver, touch ENABLE; otherwise, touch DISABLE. To allow a buzzer to sound on each touch of the screen, touch EN- ABLE; otherwise, touch DISABLE. Heat Source (if applicable) With the Evolution Connex Control, you can select the desired heat source of your system, if your system is equipped as a Hybrid HeatR System.
Page 35
A12499 Touch the zone in which you choose to change the name. Choose between selecting a COMMON NAME or CREATE A CUS- TOM NAME. If you choose select a common name, touch the name you want for that particular zone. If you choose create a custom name, use the (...
Page 40
TP- LINK is a registered trademark of TP- LINK TECHNOLOGIES CO., LTD E2012 Bryant Heating & Cooling Systems 7310 W. Morris St. Indianapolis, IN 46231 Edition Date: 10/12 Catalog No: OMSYSTXBBEC - 01 Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.