Run/Fault History; Model/Serial Numbers - Bryant Evolution Connex SYSTXBBECW01 Installation Instructions Manual

6.5.7.

Run/Fault History

This information is stored in the equipment circuit boards (if communicating) and
displayed on the control. The indoor unit and outdoor unit (if communicating) have
the following histories. To return to the previous screen, touch BACK. To exit the
Service menus, touch DONE.
Resettable Faults: Fault counters for each piece of equipment that can be reset.
S
Cycle Counters: Number of heat/cool/power cycles the unit has performed.
S
Run Times: Lifetime hours of operation in heating, cooling, and how long the
S
unit has been powered.
6.5.8.

Model/Serial Numbers

This menu item allows the installer to view the model number and serial number (if
available) of all communicating pieces of equipment in the system, including the
wall control. This information resides in the original equipment circuit board(s)
from the factory. If an equipment circuit board has been replaced, the model and
serial number will no longer be displayed. To return to the previous screen, touch
BACK. To exit the Service menus, touch DONE.
51
A12202