Bryant Evolution Connex SYSTXBBECW01 Installation Instructions Manual page 63

The PC/MAC software application to format the dealer logo and contact
information can be found at:
www.HVACpartners.com
Select "Products" from the topics tabs
Select the "Bryant Residential" pull down menu on the left side of the screen
Select "Thermostats" in the pull down menu
Select the appropriate "SYSTXBBECxxx" link
Select "Documents/Downloads" from the Additional Information box on the right
side of the screen
Select the "Dealer Logo Application" link
Download the program and follow the program instructions.
Once the dealer logo and contact information have been properly loaded onto the
USB memory device, insert the USB device into the bottom edge of the Evolutionr
Connex Control. The control will prompt you whether or not to upload the dealer
logo. Once complete, you will receive a confirmation that your upload was
successful. If the information was not stored properly on the USB device, you will
receive an error message that the dealer logo was not found. Refer back to the
PC/MAC software application instructions and try again. Once the upload is
complete, touch NEXT.
If you have problems, contact your distributor service manager for support.
55