Scan Settings (Foot)
Depending upon the colour of the patient's foot and the amount of detail
required it may be necessary to adjust the Colour and Detail.
Default settings are:
Detail - Medium-High
Colour - 2nd Darkest
The above settings are ideal for a typical Caucasian foot.
If you are experiencing missing/sparse data try a darker colour
setting.
If you experiencing large amounts of noise try a lighter colour
setting.
If you need more detail in the data then try a higher detail
setting (this will increase the data processing time).
To change the scan settings and/or action the scan of a foot see Using the
Delcam Orthotic Insoles Software. (see page 32)
Delcam iQube 2010 Reference Manual
Scanning Procedures • 55